10mm 5050 Color Changing RGB LED Strip Jumper Connector

Specification:
Weight: 0.01g.
Length: 1.78cm
Wire Length:15cm
Width (inside): 1.0cm. (standard strip)
1.2cm (brighter strip)
Depth: 0.25cm
Working Voltage: 12V DC
IP Rating: non-waterproof


This jumper connector is used to connect two lengths of 5050 sinlge color changing RGB LED strip lighting together. The LED strip light must be 8mm wide to use this connector. Before this connector can be used, the rubber waterproof coating must be removed up to 5mm from the end of both strips. This connector can then grip onto the gold coloured terminals on both strips.